Monokuma File #X

Victim: Kaito Tanaka, Former Ultimate Archer
The time of death was around 12:00 at noon.
The body was found in the restaurant area of the Future Foundation building.
The victim was killed in the restaurant’s kitchen.
There are many signs of stab wounds located all over the body, and the victim had lost an excessive amount of blood as a result of this.
Furthermore, there is a wound located on the victim’s forehead, but it appears that a different weapon was used compared to the stab wounds.

Kitchen Knife

This knife was taken from the knife holder on the kitchen counter and was found near the victim on the kitchen floor. It is believed to be the weapon used to inflict the many wounds all over Kaito's body.

Wound on Forehead

Although there are many wounds on Kaito's body, the wound on his forehead is different. Instead of slashes like all his other wounds, this one has a round shape. it is very likely that the knife was not used for this wound.

Wound on Right Hand

Kaito's right hand has a big stab wound located on his palm. It is very likely that Kaito received this wound during a struggle and got hurt trying to grab the knife out of the killer's hands. Besides the wound, there are no other wounds or blood on his fingers or other parts of his hand.

Kaito's Quiver

A case usually strapped on an archer's back to hold something. Kaito was lying on it when he died. It appears to have been tampered with recently as it is emptied out.

Kaito's Left Arm

Kaito's Left Arm was stretched out on the floor reaching toward the Ezitron manual as he died. There appeared to be many stab wounds in his upper arm, but no wounds or blood on his left hand.

Dents on Ezitron

These deep dents on Ezitron's body indicate the areas where the killer had hit the robot. The majority of the dents were on his head, neck and shoulders.

Ezitron's Control Panel

The control panel was hidden inside his body, but was revealed when the killer bashed off the metal covering it. However, the panel is also covered in a very durable acrylic case and could only be opened by unlocking it with a key. Unfortunately, the key was never found.

Hammer

This wooden mallet was found near Ezitron at the crime scene. It is believed to be the weapon that the killer used to attack Ezitron.

Nuts and Bolts

Various nuts and bolts were found on the counters, on top of the victim's body and under the tables. They were most likely as a result of the killer's assault on Ezitron.

Hugo's Account

Hugo believes that Nobu suffers from cyclothymic disorder, a variation of bipolar disorder. If a person with this disorder is provoked, they will experiences emotional highs and then experience emotional lows.

Test Your Strength Machine

This is one of the many arcade machines located in the recreation room. Felicity believes this is where the killer obtained the hammer used to attack Ezitron as there is no hammer present anywhere on the machine. On the wire that the hammer would usually be attached to, there was a mysterious scanning device.

Kaito's Bow and Arrows

These were found leaning against the karaoke machine in the recreation room. The bow appeared to be a wooden, uncurved right-handed bow. Next to it were nine arrows with wooden shafts and metal broad heads.

Penelope's Account

Even though Penelope wasn't in the kitchen with everyone when Monokuma's announcement was made, she was still able to hear it because speakers are located all over the building and played the same announcement.

Ezitron's Manual

1. Ezitron is a complex, humanoid robot created by the Future Foundation. It serves for basic needs such as cooking and cleaning. It runs on battery power but can recharge himself without assistance.
2. If Ezitron begins to act strange or doesn't function properly, you can start the emergency shutdown sequence by pressing the red button in his control panel.
3. When Ezitron sees a problem or situation which he is unable to solve, he will let off a loud alarm to alert his owner that he needs help.
4. If Ezitron loses one of his body parts, call 1-800-388-8730 to order replacement parts for Ezitron